The IS200 scanners arrives in two cardboard boxes. Please check the outer casing for damage occurred in shipping. If you detect any flaw or missing pieces immediately contact your Graphtec sales representative or nearest Graphtec vendor.
The box contains:
  • The Scanner
  • The Scanner Stand
  • Document Basket
  • Scanner Accessories

Unpacking the IS200 Scanner box

  1. Open the Scanner box
  2. Lift the top box of the scanner
  3. Remove the cushion
  4. Check contents for accessories:
    • Assembly instruction
    • Power cable
    • Software CD
    • Users Manual
    • 3 Document Support Wires
    • Document support unit
    • 1 pack of cleaning paper
    • One basic calibration sheet (white)
    • One color calibration sheet (Only IS200ProLC)
    • Carrier Sheet ISO 907

       

 


Scanner Box

Unpacked with accessories

Calibration sheets. Color sheet only with IS200ProLC

Unpacking the IS200 Scanner Stand

Open the scanner stand box

  1. Unpack the scanner stand
  2. Check Contents for the Stand
    • Assembly instruction
    • Two caster frames
    • Two side stray
    • Center Bar
    • 12 screws (M5x10)
    • 4 coin screws (M4x10)
    • Document Basket
    • Hexagonal wrench for M5 screws

 


Scanner Stand box

Scanner stand box Unpacked